Anyone know who makes good rods and pistons for you cars? Also where can you get them?
Found this on http://Summitracing.com
these are Eagle ESP H-Beam Connecting Rods
hope it helps, not shure of quality
ESP-5483F3D $399.95
Estimated Ship Date: Today
Brand: Eagle Specialty Products, Inc.
Product Line: Eagle ESP H-Beam Connecting Rods
Connecting Rod Length Center To Center (in): 5.483
Connecting Rod Beam Style: H-beam
Connecting Rod Material: Forged 4340 steel
Connecting Rod Finish: Shot-peened
Wrist Pin Style: Floating
Clearanced for Stroker: No
Cap Retention Style: Cap screw
Connecting Rod Bolt Brand: ARP
Connecting Rod Bolt Diameter: 5/16 in.
Connecting Rod Bolt Material: ARP 2000 alloy
Fastener Yield Strength (psi): 230,000
Connecting Rod Bolt Head Style: 12-point
Pressurized Pin Oiling: No
Approximate Connecting Rod Weight (g): 535
Weight Matched Set: Yes
Remanufactured: No
Balanced: No
Magnafluxed: Yes
Quantity: Sold as a set of 4.
Connecting Rods, ESP H-Beam, 4340 Steel, Bushed, Ford, 2.0L, Set of 4
Check to make sure this part fits your application
Not just another rod!
Free your engine’s horsepower on the wings of Eagle ESP H-beam connecting rods. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides outstanding strength, while still weighing much less than stock rods. Each rod is multi-stage heat-treated, x-rayed, sonic tested, magnafluxed, 100 percent machined, and shot-peened to stress-relieve the metal. The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings for floating pin models, and are available in stroker models that allow additional cam-to-rod clearance for large stroke combinations. They come standard with 190,000 psi rated ARP 8740 rod bolts and 230,000 psi rated ARP 2000 or 265,000 psi rated ARP L-19 bolts as upgrades. Instructions and rod bolt lubrication are included.
You know I beleive that Focus sport carries the rods and pistons bycosworth engineering. They also have a heavy duty block that they have left over from WRC with piston oil squirters.
JE Pistons and crower rods and manley rods.
I stock eagle rods for 350.00 for a set of Four let me know
along with je pistons etc…
$350 for shaft and head?
This would be to strengthening, mainly?
OK heres what i can do for you fellow Gear heads.
JE Forged Piston set Available in 9.0:1 or 10.5:1 Compression Ratio. $450.00,
Eagle 4340 Rods set of 4. $350.00
JE Moly Rings. $100.00
Main Brgs Set $30.00
ETC…