 |
 |
zx2ms.comEverything you need for your ZX2! |
|
|
Page 1 of 1
|
[ 10 posts ] |
|
| Author |
Message |
|
pissdrunx16
|
Post subject: Headlights Posted: Thu Feb 25, 2010 11:46 am |
|
Joined: Mon May 26, 2008 9:00 am Posts: 188 Location: Reedsport, OR
|
|
_________________ MMI CAI, ZXTuner Header, 2.5" Stainless Tru Bendz, MSD Coil, Ford Racing Wires, TWM STS, SCT xcal3, Cam Gears W/ VCT Delete, Fiddy Flywheel, Spec Stg. 2 Clutch, UDP, 16" TSW, S/R Cluster, S/R Knob and Boot, 98 VC, Steering Wheel/Hub, VIS CF Hood
|
|
 |
|
 |
|
pissdrunx16
|
Post subject: Re: Headlights Posted: Thu Feb 25, 2010 1:30 pm |
|
Joined: Mon May 26, 2008 9:00 am Posts: 188 Location: Reedsport, OR
|
|
noticed today after it was glued back together that I left a couple finger print smudges on the shroud fml LOL oh well
_________________ MMI CAI, ZXTuner Header, 2.5" Stainless Tru Bendz, MSD Coil, Ford Racing Wires, TWM STS, SCT xcal3, Cam Gears W/ VCT Delete, Fiddy Flywheel, Spec Stg. 2 Clutch, UDP, 16" TSW, S/R Cluster, S/R Knob and Boot, 98 VC, Steering Wheel/Hub, VIS CF Hood
|
|
 |
|
 |
|
SharkyZX
|
Post subject: Re: Headlights Posted: Wed Mar 03, 2010 12:03 pm |
|
 |
| Newbie |
 |
Joined: Fri Sep 11, 2009 4:38 pm Posts: 17 Location: San Diego
|
Looks sweet. get the other one done and get them on the car - or sell them to me 
|
|
 |
|
 |
|
pissdrunx16
|
Post subject: Re: Headlights Posted: Wed Mar 03, 2010 12:05 pm |
|
Joined: Mon May 26, 2008 9:00 am Posts: 188 Location: Reedsport, OR
|
|
_________________ MMI CAI, ZXTuner Header, 2.5" Stainless Tru Bendz, MSD Coil, Ford Racing Wires, TWM STS, SCT xcal3, Cam Gears W/ VCT Delete, Fiddy Flywheel, Spec Stg. 2 Clutch, UDP, 16" TSW, S/R Cluster, S/R Knob and Boot, 98 VC, Steering Wheel/Hub, VIS CF Hood
|
|
 |
|
 |
|
Bignred23
|
Post subject: Re: Headlights Posted: Thu Mar 04, 2010 7:20 am |
|
 |
| Newbie |
 |
Joined: Fri Jan 22, 2010 10:02 am Posts: 6 Location: Clarkston, MI
|
|
I am jealous. I would love to do headlights like that with the halo rings too. And those fingerprints would bother me lol
_________________ 2002 Manual Sonic Blue ZX2 Stage 3 clutch 4 infinity kappa speakers on a 4 channel amp 12" MTX 7500 sub on a 1000w Kenwood 2 channel amp 17" Seven X rims
|
|
 |
|
 |
|
pissdrunx16
|
Post subject: Re: Headlights Posted: Thu Mar 04, 2010 9:49 am |
|
Joined: Mon May 26, 2008 9:00 am Posts: 188 Location: Reedsport, OR
|
|
These are just projectors with shrouds, no halo lights. LOL the finger prints both me but not a shit ton, cause you have to kinda look to see em.
_________________ MMI CAI, ZXTuner Header, 2.5" Stainless Tru Bendz, MSD Coil, Ford Racing Wires, TWM STS, SCT xcal3, Cam Gears W/ VCT Delete, Fiddy Flywheel, Spec Stg. 2 Clutch, UDP, 16" TSW, S/R Cluster, S/R Knob and Boot, 98 VC, Steering Wheel/Hub, VIS CF Hood
|
|
 |
|
 |
|
2000zx2charlles
|
Post subject: Re: Headlights Posted: Sun Jun 20, 2010 1:46 pm |
|
 |
| Newbie |
 |
Joined: Wed Nov 25, 2009 2:47 pm Posts: 38
|
|
thoses r sweet man. were did u get the parts to do it.
|
|
 |
|
 |
|
pissdrunx16
|
Post subject: Re: Headlights Posted: Mon Jun 21, 2010 8:29 am |
|
Joined: Mon May 26, 2008 9:00 am Posts: 188 Location: Reedsport, OR
|
I just finished a set last night for a fellow forum member. Here check this thread out, since I haven't up dated this one in a while http://teamzx2.com/threads/25214-My-Pro ... dated-pg.4 I found all the parts I needed on eBay
_________________ MMI CAI, ZXTuner Header, 2.5" Stainless Tru Bendz, MSD Coil, Ford Racing Wires, TWM STS, SCT xcal3, Cam Gears W/ VCT Delete, Fiddy Flywheel, Spec Stg. 2 Clutch, UDP, 16" TSW, S/R Cluster, S/R Knob and Boot, 98 VC, Steering Wheel/Hub, VIS CF Hood
|
|
 |
|
 |
|
2000zx2charlles
|
Post subject: Re: Headlights Posted: Tue Jun 22, 2010 11:37 am |
|
 |
| Newbie |
 |
Joined: Wed Nov 25, 2009 2:47 pm Posts: 38
|
|
thanks 4 the info wat do i look for on ebay is there kits one there.
|
|
 |
|
 |
|
pissdrunx16
|
Post subject: Re: Headlights Posted: Tue Jun 22, 2010 2:19 pm |
|
Joined: Mon May 26, 2008 9:00 am Posts: 188 Location: Reedsport, OR
|
|
there are kits, but I didnt go with a kit.... I went 100% custom. I got some bixenon projectors, then ordered some shrouds, an HID kit, and the relays, bought some wire, soder, heat shrink. And just went to town. This entire project was kinda pricey though. Just the projectors where $80-100, Shrouds $20-50, HID kit $40, Relays $50, and the costs of other odds and ends. And ontop of having a set of lights to work with. I can give you details if you want PM me.
_________________ MMI CAI, ZXTuner Header, 2.5" Stainless Tru Bendz, MSD Coil, Ford Racing Wires, TWM STS, SCT xcal3, Cam Gears W/ VCT Delete, Fiddy Flywheel, Spec Stg. 2 Clutch, UDP, 16" TSW, S/R Cluster, S/R Knob and Boot, 98 VC, Steering Wheel/Hub, VIS CF Hood
|
|
 |
|
 |
|
|
Page 1 of 1
|
[ 10 posts ] |
|
Users browsing this forum: No registered users and 1 guest |
| |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|

|
 |